Knurr Cooltherm Bedienungsanleitung Seite 20

CoolTherm
Manual / Bedienungsanleitung
Remove this air duct for
bleeding, draining the
heat exchanger and
checking the valve
- Carefully bleed heat exchanger when filling the system.
- Open the air bleed valve until the coming out water is bubble free.
Close this valve after bleeding carefully.
-
Valve drive
connection
If no drive
(option) is
equipped, the
black cap
must be
pulled up
thightly
Chilled water
return
Chilled water
feed
CoolTherm 01.998.330.0 issue / Ausgabe h
Air bleed valve
Drain valve
page / Seite 20/76