Sage the Oracle Touch SES990BTR Kurzanleitung Seite 13

CLEANING THE DRIP TRAY
& STORAGE TRAY
• The drip tray should be removed,
emptied and cleaned after each use.
• Remove grill from the drip tray.
Wash the drip tray in warm soapy water.
• The storage tray can be removed
and cleaned with a soft, damp cloth
(do not use abrasive cleansers, pads
or cloths which can scratch the surface).
CLEANING THE OUTER HOUSING
& CUP WARMING TRAY
• The outer housing and cup warming tray can
be cleaned with a soft, damp cloth. Polish with
a soft, dry cloth. Do not use abrasive cleansers,
pads or cloths which can scratch the surface.
NOTE
Do not clean any of the parts or accessories
in the dishwasher.
DESCALE
• Use this function to access the descale
procedure when promoted on screen.
• The machine will enter descale mode if you
choose to descale from the pop-up message
or if you choose 'Settings' > 'Descale Cycle'.
Follow the instruction on the touch screen.
• Please ensure you allow approximately
1.5 hours to complete the entire descale process
and follow the step by step instructions.
If you've just finished using your machine,
please ensure to turn the machine off
and allow to cool for at least 1 hour
before starting your descale process.
NOTE
DO NOT attempt to descale your machine without
using the Descale procedure in the Settings menu.
Damage to your machine could occur.
EN
13