Kilometre Counter; Acoustic Warning Control; Transmission Chain Backlash Control - Benelli BN302 Benutzerhandbuch

KILOMETRE COUNTER

Make sure that the kilometre counter and
speedometer are operating correctly.

ACOUSTIC WARNING CONTROL

• Turn the key to "
"
• Press the acoustic warning button
and make sure that it operates cor-
rectly.
All manuals and user guides at all-guides.com
TRANSMISSION CHAIN BACK-
LASH CONTROL
• After stopping the engine, place the
vehicle on a rear stand on a horizon-
tal surface and with the gear in neu-
tral
• Make sure that in an intermediate
point of the chain, halfway between
the pinion and crown gear, there is a
vertical backlash of 10-15 mm.
10-15 mm
• After moving the vehicle forwards,
check the backlash of the chain,
which must be constant.
93
IMPORTANT NOTICE:
Using the motorcycle with the chain in
bad condition and badly adjusted may
cause accidents.
If you notice any operating anomaly on
the chain, such as excessive or suspi-
cious noises, or excessive slack, go to
an authorised Benelli workshop.
If you suspect that there is a serious mal-
function with the chain, stop the bike im-
mediately and call your nearest Benelli
authorised workshop.
IMPORTANT NOTICE:
Every time that the chain is replaced, it
is also necessary to it a new crown and
pinion.
EN