Changing Coolant; Clutch Backlash Adjustment; Spark Plug Inspection - Benelli BN302 Benutzerhandbuch

CHANGING COOLANT

Change cooling luid at the intervals
speciic in the periodical maintenance
and lubrication sheet. Have the coolant
changed by an Authorised Benelli Deal-
er.
IMPORTANT NOTICE:
Never try to remove the radiator cap
when the engine is hot.
All manuals and user guides at all-guides.com
CLUTCH BACKLASH
MENT
The clutch lever backlash needs to be
10-0-15.0 mm as shown in the igure.
Check the clutch lever backlash regular-
ly and adjust as necessary:
C A
101
1) Loosen the clutch ring nut "A" and the
ADJUST-
clutch screw "C" on the cable, at the
same time.
2) To increase clutch lever backlash,
turn the clutch screw "C" clockwise
(seen from sitting on the bike).
10.0-15.0 mm
To reduce the clutch lever backlash,
turn the clutch screw "C" anticlock-
wise (seen from sitting on the bike).
3) After adjusting, tighten the clutch ring
nut "A".

SPARK PLUG INSPECTION

Since the spark plug replacement and
check may be dificult for an operator
with little experience, we recommend
contacting an authorised Benelli work-
shop.
EN