Main Controls; Left Dial; Right Dial - Benelli BN302 Benutzerhandbuch

EN

MAIN CONTROLS

LEFT DIAL

1) High beam / low beam light
control
Set this switch to "
lights and to "
2) Left/right position indicator
switch
Press this switch to enable the left and
right and rear indicators. Press the cen-
tre to disengage them.
3) Sound warning switch
Press this switch to enable the sound
alarm.
4) Passing button
Press this button (daytime) to enable
lashing lights.

RIGHT DIAL

1) Electric ignition button
Press this button to start the engine with
the starter device.
All manuals and user guides at all-guides.com
2) Emergency light button
With the ignition key set to "
this switch to switch on the emergency
lights (simultaneous lashing of all of
the direction indicators).
The emergency lights are used in case
of emergency, to advise the other road
users that your vehicle is about to stop
" for high beam
in dangerous trafic areas.
" for low beam lights.
Do not use the emergency lights when
the engine is off; this is to stop the bat-
tery from becoming flat.
3) Engine off button
Set this switch to "
ing on the engine. Set this switch to
"
of emergency, such as, for example,
when the motorbike tilts over or the ac-
celerator cable is blocked.
" use
WARNING:
" before switch-
" to switch off the engine in case
80
1
4
2
3
2
1
3