10. Installing the top platforms
Install the 8 top platforms starting from the steel wall joint as shown in diagram 22. Adjust the dis-
tance between the two metal pieces if necessary to accommodate for the top platforms.
Note
Make sure that
you place the
longer side of the
top platform
facing out and
the shorter side
facing inside
the pool.
Line up the screw holes and lightly fasten with
the bolts provided in the package. (See dia-
gram 23).
Repeat these steps for all 8 top platforms and
make sure they are all mounted properly be-
fore finally tightening all the nuts.
11. Fixing the bottom joint protector
Fix the bottom joint protector to the vertical supports, using the ST4.2x13 screws (No.16) as shown
in diagram 24.
122
MV-2901-2902-2903-2912-2913-2914-2915-11-2017 . © Alle rettigheder forbeholdes Swim & Fun Scandinavia ApS
UK