Technical Data - KIPP K1494.01 Bedienungsanleitung

8. Te chnica l D a t a
Power supply
Operating voltage
Nominal current
Wattage
Surge voltage category
Interfaces
Signal inputs
Signal outputs
Antenna connection
Connection terminals
Connection cables
Stripping length
Surge voltage category
Designated load
Wireless transfer
Transfer protocol
Transmission frequency
Range
Transfer rate
Displays / control elements
LED green (Power)
LED green (wireless reception)
LED yellow (actuation status)
LED red (battery status)
Switch
HEINRICH KIPP WERK GmbH & Co. KG
Heubergstrasse 2
72172 Sulz am Neckar
[V] 24 V DC
[A] 0.3 (max. 0.32 / min. 0.27)
[W] 7.2
I
7x by wireless transfer
No. 1 to 6: for signal monitoring
UI: for monitoring by a mobile terminal
8x potential free changer contacts
2A 24V DC / 2A 250V AC
K1-K6: Signal request actuation status
K7:Radio link status
K8: Battery level status
R-SMA socket (for supplied antenne)
Screw terminals 0.2 mm² to 1.31 mm²
24 - 16 AWG / 0.205 mm² to 1.31 mm²
[mm] 5 to 6
II
AC and DC circuits, general load
Bluetooth Low Energy
[GHz] 2.4
[m] about 10
[1/s] 10
Lit when the device is operating.
Lit when the linked device is within range.
Indicates the actuation status of the linked device.
Lit when the battery needs to be replaced.
Allows a device to be connected or disconnected to/from
the desired signal input on the gateway.
Tel. +49 7454 793-0
Fax +49 7454 793-33
44
info@kipp.com
www.kipp.com Status: 26.11.2020