Operator Responsibility - KIPP K1494.01 Bedienungsanleitung

3 . S afe ty and w arni ng notes
manual is observed. During use, the legal and safety regulations required for the respective application must
also be observed. This also applies analogously to the use of accessories.
The Gateway is not intended for safety relevant functions.
Correct and safe operation of the device requires proper transport, storage, installation and mounting, as well
as careful operation and maintenance.
The device is designed and constructed exclusively for the intended use described here and may only be
used in accordance with this. The technical specifications in this manual must be observed.
Improper handling or operation of the equipment beyond the technical specifications may cause damage and
malfunction.
3 .3 O perat or re spons ibil it y
The device is intended for use in the commercial sector. The operator is therefore subject to the legal
obligations for industrial safety.
The safety instructions in this user manual as well as the safety, accident prevention and environmental
regulations valid for the application area of the device must be observed.
To work safely with the device, the operator must ensure:
• that the qualified electricians are regularly instructed in all applicable questions of work safety,
first aid and environmental protection, and that they are familiar with the operating instructions
and especially the safety instructions contained therein.
• that the device is suitable for the intended use.
HEINRICH KIPP WERK GmbH & Co. KG
Heubergstrasse 2
72172 Sulz am Neckar
Tel. +49 7454 793-0
Fax +49 7454 793-33
31
info@kipp.com
www.kipp.com Status: 26.11.2020