Electrical Connection - KIPP K1494.01 Bedienungsanleitung

5 . Commiss io ni ng , O p era tion
5 .2 E lectr ical c onne ct i on
!
WARNING!
Hazard protection
Depending on the wiring of the relay outputs, safety measures are required to protect the maintenance
or electrical personnel from hazards e.g. protective covers for the exposed terminals.
INFO!
Observe maximum cable lengths
The maximum permissible cable length for an EMC-compatible installation is 3 metres.
Pin assignment:
!
WARNING!
Observe the technical data
The exact requirements, component characteristics, conductor cross-sections and stripping lengths can
be found in the section Technical Data.
It must be ensured that no wire strands protrude and touch neighbouring terminals, e.g. when using
crimped ferrules.
A suitable tension relief must be provided.
HEINRICH KIPP WERK GmbH & Co. KG
Heubergstrasse 2
72172 Sulz am Neckar
Tel. +49 7454 793-0
Fax +49 7454 793-33
37
info@kipp.com
www.kipp.com Status: 26.11.2020