Description; Control Panel; Package Contents - KIPP K1494.01 Bedienungsanleitung

2 . De si gn an d F unc tion
2 .2 Des crip tion
The Gateway forms the interface between the indexing plungers with status sensor and a machine
controller. It receives a radio signal from the indexing plunger and sends a binary output signal from the
relay port which can be read by the machine control system.
This enables the actuation statuses of up to 6 indexing plungers to be transmitted.
A mobile device can be connected to the Gateway for additional visualisation.
The integrated control panel with buttons and LED's enables not only the connection and disconnection
of the indexing plungers, but also the monitoring of the radio link, the actuation status and the battery
charge.
2 .3 Con trol p ane l
1
2
3
4
5
6
1. LED "Power" green
2. Designates the input channel
3. LED "Radio link" (green)
4. LED "Actuation status" (yellow)
5. LED "Battery charge level" (red)
6. Pairing buttons
2 .4 Pack a g e c ont ent s
1. Gateway
2. Antenna
3. User manual
4. Packaging
HEINRICH KIPP WERK GmbH & Co. KG
Heubergstrasse 2
72172 Sulz am Neckar
Tel. +49 7454 793-0
Fax +49 7454 793-33
29
info@kipp.com
www.kipp.com Status: 26.11.2020