Maintenance - Gima LUX 100 Handbuch

INSTALLATION OF MODEL (LED) WITH BATTERY COMPARTMENT
Device with Head Band
Mounted Battery Box
- CR 123 battery box (3V DC) Output.
- Connecting Cable for Head Band, Length 30 cm
- Spare Coupler with Screw.
- LED Assembly for Clar Mirrors.
- Spare Open Head Band for Clar Headlights.
- Lamp and Mirror Assembly, (Mirror diameter as required)
Once the system is setup up and light is turned on, the diameter of the spot can be increased
or decreased by moving the bulb towards or away from the mirror.

MAINTENANCE

The product has been conceived to last forever; it is resistant to most of chemicals except
for methyl ethyl ketones.
- Do not use abrasive materials to clean the mirror, which could cause permanent damages.
Before removing the bulb, make sure that the instrument has been turned off for few minutes
to avoid the risk of burning of Figures.
- Cold clean the helmet with some disinfectant and a sponge.
- Clean the mirror with an adequate glass cleaner and cotton cloth
Caution: read instructions
(warnings) carefully
Keep in a cool, dry place
Manufacturer
Medical Device compliant with Regulation (EU) 2017/745
Disposal: The product must not be disposed of along with other domestic waste. The users
must dispose of this equipment by bringing it to a specific recycling point for electric and elec-
tronic equipment.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
ENGLISH
Follow instructions for use
Keep away from sunlight
Product code
8
Medical Device
WEEE disposal
Lot number