Radio - Kenwood KDC-200UB Bedienungsanleitung

RADIO

Search for a station
1
Press repeatedly to select TUNER.
2
Press repeatedly (or press
RC-406) to select FM1/ FM2/ FM3/ MW/ LW.
3 Press S / T (or press S /
for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1 to 6).
• To select a stored station: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
Tuning is automatically canceled.
6
Other settings
1
2
3
4
To return to the previous setting item, press
TUNER SETTING
/ on
LOCAL SEEK
on RC-406) to search
AUTO
MEMORY
MONO SET
NEWS SET
REGIONAL
AF SET
(for )
TI
PTY SEARCH
2 , Direct Access
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select an item (see the following table), then
press the knob.
Repeat step 2 until the desired item is selected or activated.
Press and hold to exit.
ON: Searches only stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once you change
the source/station, you need to make the settings again.
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)
ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.
ON: Switches to another station only in the specific region using the "AF" control. ;
OFF: Cancels.
ON: Automatically searches for another station broadcasting the same program
in the same Radio Data System network with better reception when the current
reception is poor. ; OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information if available ("TI"
lights up). ; OFF: Cancels.
1 Press the volume knob to enter PTY language selection.
2 Turn the volume knob to select the PTY language (ENGLISH/ FRENCH/
GERMAN), then press the knob.
3 Turn the volume knob to select the available Program Type (see the following).
4 Press S / T to start searching.
.
Default: XX