Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ash;
• do not rest the ash vacuum cleaner on flammable
or polymeric surfaces, including carpeting and
vinyl tile.
HOW TO PREPARE AND USE THE ELEC-
TRIC ASH VACUUM CLEANER
(see fig. ⑤)
• Make sure the filter N or O is fitted in its housing .
• Connect the metal hose F1 to its fitting T .
• Connect the metal straight lance F2.
• Before vacuuming the ash, check that it is cold
and no longer alight.
Do not vacuum burning embers
• Do not empty the drum into a container which
is easily inflammable and make sure that the
ashes are completely cool.
• If the metal hose becomes hot during use, turn the
device off immediately and let it cool.
• Turn the appliance on using the (I)ON switch, lo-
cated on the cover of the motor.
• Vacuum the ash directly from the fireplace or from
the stove (wood or pellet-burning). Hold the suc-
tion nozze about 1 cm. above the ash.
(see fig. ⑧) Automatic filter shaker C: If there
should be a reduction in the suction power,
operate the filter reset buton C several times
and and close the end of hose, to reset the filter
. It is advisable, in any case, to clean a max. of 2-3
Kg of ash (wood or pellets) during each cleaning
operation.
• When the appliance is no longer in use, turn it off
(0) and take the plug out.
• When the stove or fireplace has been cleaned, the
appliance and suction filter must then be cleaned.
USAGE
WET & DRY VACUUM CLEANER
(see fig. ⑥⑦)
• Be sure that switch is in off position (0) OFF and
connect the machine to a suitable socket.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Insert the suitable filters for the proper use.
•Never use the appliance without filters .
• Use the most suitable accessories for the requested
usage.
• Put switch on (-) ON position in order to start the
machine.
(see fig. ⑧) Automatic filter shaker C: If there should
be a reduction in the suction power, operate the
12
filter reset buton C several times, to reset the filter
. It is advisable, in any case, to clean a max. of 2-3
Kg of ash (wood or pellets) during each cleaning
operation.
• When job is over, switch off (0) OFF and keep away
the plug from the socket.
• If the appliance is used with especially fine dust
(size below 0.3 µm) the filter supplied will require
cleaning more frequently. For especially deman-
ding applications, the use of specific filters sup-
plied as an optional (Hepa) may be necessary.
Blower function
see fig. ④
•
FILTER CLEANING
(see fig. ⑨)
• The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
1- Remove the filter P , O , N
2- Shake the filter P , O , N
3- wash tge filter N
4- Let the filter N drying very well ,befor reassemble it
• Once the filter has been cleaned, check whether it
is suitable for further use. If it has been damaged or
broken, replace it with an original filter.
CARE AND MAINTENANCE
The unit is maintenance-free.
• The machine shall be disconnected from its
power source, by removing the plug from the
socket-outlet, during cleaning or maintenance
• Clean the exterior part of the machine with a dry
cloth.
• Move the appliance only by catching the
carrying handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.
WARRANTY CONDITIONS
All our machines are subjected to strict tests and
are covered against manufacturing defects in ac-
cordance with applicable regulations. The warran-
ty is effective from the date of purchase.
The following are not included in the warranty:
- Parts subject to normal wear. - Rubber parts, char-
coal, filters and the accessories and optional acces-
sories. - Accidental damage, caused by transport,
Werbung
Inhaltsverzeichnis
