Power On/Off - Niceboy RAZE 4 ORIGIN Bedienungsanleitung

CHARGING
We recommend that you fully charge the speaker before using it for the first time to
maximize battery life. It takes approximately 2-3 hours to fully charge. An acoustic
signal will indicate a low battery. To charge the loudspeaker battery, connect the
supplied USB-C cable to the charging port (6) and connect it to any charging adapter
(5V voltage and at least 1A output current) or to a USB in a PC. During charging, the
LED indicator remains red (1) and turns off after the charging is fully completed.
POWER ON / OFF
To turn the loudspeaker on or off, press and hold the „O" button (3) for 2-3 seconds.
After 10 minutes of inactivity, the loudspeaker will turn off automatically to save
energy.
CONNECTING TO BLUETOOTH
1. Press the „O" button (3) for 2-3 seconds to turn the loudspeaker on. The
loudspeaker is now in pairing mode for Bluetooth connectivity. Pairing mode is
signalled by flashing of the blue operating LED (1).
2. Activate Bluetooth on your device. Select "Niceboy RAZE 4 Origin" in the list of
available devices.
3. The device will connect to the loudspeaker. A successful pairing is signalled by
an acoustic prompt and the blue operating LED (2) will remain lit.
To disconnect form Bluetooth, press the "O" button (3) three times.
PLAYBACK
To start or pause a track, briefly press the "O" button (3). To control the volume,
briefly press buttons "+" (2) and "-" (4). Press and hold these buttons to skip to the
next or previous track.
11