Transfer - SISER TS-BASE Gebrauchsanweisung

7 TRANSFER

When the press has reached the desired temperature:
• Position the fabric on the lower plate.
• Position the application and completely close the press to block the heating plate.
• The timer will automatically count the time set and, when up, an acoustic signal is emitted.
• Open the heating plate when the time is up.
• When the transfer process is complete, the timer automatically returns to the time set by
the user. At this point, the press is already ready for subsequent transfer.
ATTENTION:
93°C is the minimum temperature the display can indicate
96°C is the minimum temperature which can be set
221°C is the maximum temperature the display can indicate
and which can be set
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
TS-BASE Manual for use and maintenance
Mod. PRD 20/3 - Last updating 10/2019
TS
BASE
7
EN
29