VOLTCRAFT DL-260A Bedienungsanleitung Seite 43

"PDF REPORT OPTIONS"
Select "PDF Report Options" in the navigation bar and enter settings to define content of the PDF report.
LANGUAGE
PDF FILE NAME
DATE FORMAT
TIME FORMAT
OWNER
LOCATION
REPORT TITLE
USER TEXT
Other settings
CREATE
CONFIGURATION
LOAD SETTINGS
DEFAULT
Choose the language, in which the PDF report shall be shown, from the selection box.
Click on "INSERT NAME" to define the pattern of the file name.
A new window "PLEASE CHOOSE THE NAME PATTERN BELOW" opens. Choose the
required elements (OWNER/SERIAL ID/MODELNAME/DATE/TIME/LOCATION) and their
order.
Up to 6 elements can be chosen. Chosen elements appear in the field "FILE NAME".
Press "CLEAR" to delete all chosen elements. The field "FILE NAME" is empty again.
Press "X" to save the file name pattern and close this window.
Select your preferred date format from menu.
Select between 12 hour or 24 hour format.
Key in the owner's name.
Key in the location's name e.g. the name of the location where you will record.
Enter a report title, which will be shown on the PDF report.
Enter some remarks or additional information if needed.
Create the configuration file and save it to your computer and install it to the data logger.
For further instructions, please refer to"e) Create configuration file by website" on page 44
and "f) Load configuration file created on the website onto the data logger" on page 44) .
Load a previous configuration file - if any - to check the details of that file on the website.
A new window pops up.
Choose a configuration file, which you have created and saved on the computer earlier.
Reset the settings to default values and setting.
43