Maintenance And Service - Bosch AQT 35-12 Originalbetriebsanleitung

OBJ_BUCH-1953-005.book Page 14 Monday, December 16, 2013 1:37 PM
14 | English
Problem Possible Cause
Motor starts up but with re- No water supply
stricted or no working pres-
Water filter clogged up
sure
Nozzle clogged up
The pressure washer starts ir- Pump/power gun leaky
regularly by itself
Water leaks from machine Leaking pump
No detergent taken in Adjustable nozzle on high pressure setting Attach the High Pressure Foam nozzle or select the
Detergent too dense
High pressure hose extension being used. Fit original hose.
Deposits or restriction in detergent circuit Flush with clean water and eliminate any restric-

Maintenance and Service

Maintenance
 Stop, remove plug from the power supply and discon-
nect from water supply.
Note: To ensure long and reliable service, carry out the follow-
ing maintenance regularly.
Regularly check for obvious defects such as loose fixings, and
worn or damaged components.
Check that covers and guards are undamaged and correctly
fitted. Carry out necessary maintenance or repairs before us-
ing.
If the machine should happen to fail despite the care taken in
manufacture and testing, repair should be carried out by an
authorised customer service agent for Bosch garden prod-
ucts.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the machine.
After use/Storage
Turn the main switch off and operate the trigger to drain the
water from the high pressure hose.
Clean the exterior of the machine thoroughly using a soft
brush or cloth. Do not use water, solvents or polishes. Re-
move all debris, especially from the ventilation slots.
End of season storage: Drain water out of pump running mo-
tor for a few seconds. Pull trigger to release all water.
Do not place other objects on top of the machine.
Store in a frost-free area.
Ensure cables are not trapped when storing. Do not kink high
pressure hose.
F 016 L70 995 | (16.12.13)
Corrective Action
Connect water supply
Clean the water filter
Clean nozzle
Contact your Bosch Service Centre
A slight water leak is permissible; in case of exces-
sive leak, contact Service centre.
foam setting on the 3 in1 nozzle
Dilute with water
tions. If the problem persists, contact your Bosch
Service Centre.
After-sales Service and Application Service
www.bosch-do-it.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Bosch Power Tools