OHAUS Scout Serie Bedienungsanleitung Seite 15

TM
SCOUT SERIES BALANCES - SPX
Exponent
Set the factor multiplier.
-3 = divide the Factor by 1000 (1x10
-2 = divide the Factor by 100 (1x10
-1 = divide the Factor by 10 (1x10
0 = multiply the Factor by 1 (1x10
1 = multiply the Factor by 10 (1x10
2 = multiply the Factor by 100 (1x10
3 = multiply the Factor by 1000 (1x10
Least Significant Digit
Set the graduation.
Settings of 0.5, 1, 2, 5, 10, 100 are available.
Note: Custom Unit is locked at Off position when the Security Switch is set to the locked position.
Follow below instructions below to enter the unit menu to set the Custom Unit.
Press and hold Menu until [
show [ ]. Press No through the succeeding menu items:
displayed.
1. When [
2. [ ] will be displayed. Press No, [
3. Press No to toggle through active units until [
4. Press Yes, [
5. [ ] is displayed. Press Yes to view the default Factor. Press Yes to accept or No to edit
factor multiplier
[ ]. Repeatedly press No until the desired number appears. Press Yes to accept and
highlight the next digit. Repeat until all the digits are correct. Press Yes
value.
6. [ ] is displayed. Repeat the same procedure as in step 5 to accept or edit the Exponent
value. Press Yes to accept the Exponent value.
7. [ ] is displayed. Repeat the same procedure as in step 5 to accept or edit the Least
Significant Digit value. Press the Yes key to accept the graduation value, [
8. When [
Find Quality Products Online at:
-2
-1
)
0 )
1
)
2
] is displayed. When the button is released, the display will
] is displayed, press Yes.
c
] will be displayed, then press Yes.
] is displayed, press Exit to exit to weighing mode.
GlobalTestSupply
www.
-3
)
)
)
3 )
] will be displayed.
g
c
] is displayed.
[ ], [ ], [ ] until [
] is displayed.
.com
sales@GlobalTestSupply.com
EN-13
] is
Factor