Atag hi7071a Bedienungsanleitung Und Installationsanweisung Seite 58

safety
what you should pay attention to
A magnetic field is generated in the appliance. By placing a
pan with an iron base on a cooking zone, a current is induced
in the pan base. This induced current generates heat in the
base of the pan.
The coil (1) in the
hob (2) generates a
magnetic field (3). By
placing a pan with an
iron base (4) on the
coil, a current is
induced in the base
of the pan.
easy
The electronic controls are accurate and easy to set. On the
lowest setting, you can melt chocolate directly in the pan, for
example, or cook ingredients that you would normally heat in
a bain-marie.
fast
Thanks to the induction hob's high power levels, bringing
food to the boil is very quick.
Cooking food through takes just as long as for other types of
cooking.
clean
The hob is easy to clean. Because the cooking zones do not
get any hotter than the pans themselves, food spills cannot
burn on.
safe
The heat is generated in the pan itself. The glass top does
not get any warmer than the pan. This means that the risk of
you burning yourself on the appliance is very small. Once a
pan has been taken away, the cooking zone cools down
quickly.
GB 4
environmentally conscious
4
3
2
1. Heat loss and hot
handles with a
1 conventional hob.
2. No heat loss and
cold handles with
induction cooking.
what you should pay attention to
Heat losses are minimal, because the heat is generated in
the pan itself.
For smaller pans, only that part of the zone that is in contact
with the base of the pan is activated. An associated
advantage is that the handles of the pan do not get hot due
to radiant heat around the pan.
1 2
safety
GB 5