Video Recording Mode - Z-EDGE Z3 Bedienungsanleitung

VIDEO RECORDING MODE

Motion Detection
With "Motion Detection" enabled, video recording is automatically paused when no
movement is detected by the front view camera or G-Sensor. Video recording will
automatically start again when movement is detected. This feature can be disabled or
enabled inside the menu: Video Mode Menu > Motion Detection.
Video Duration
Videos are recorded and saved to the memory card as multiple video clips. Once the
memory card is full, the "Loop Recording" feature automatically overwrites the earliest
unprotected saved file. This prevents long duration video clips from being lost in a single
overwrite. Video clip duration can be set to 1, 3 or 5 minutes inside the menu: Video
Mode Menu > Video Duration.
Crash Detection
In the event of a collision the "Crash Detection" feature, triggered by the highly sensitive
built-in G-Sensor, will automatically turn video recording on and protect the saved file.
The sensitivity of the G-Sensor can be set to Off, Low, Medium or High inside the menu:
Video Mode Menu > G Sensor Setting.
Parking Mode
When "Parking Mode" is enabled, the device continues to monitor the vehicle while it is
turned off and parked. If any motion or vibration is detected by the device, it will
automatically turn on and begin recording. Approximately 20 seconds after the motion or
vibration has finished, the device will automatically turn off and return to monitoring mode.
In "Parking Mode" the device is powered by the internal rechargeable battery, and the LCD
display screen is automatically set to power save to conserve battery power. This feature
can be disabled or enabled inside the menu: System Settings > Parking Monitoring Mode.
Emergency Video Protection
In addition to automatic video file protection via "Crash Detection," any video can be
protected manually by pressing the "Menu" button during a video recording. A warning
icon appears on screen to signify the file has been successfully protected.
Audio Recording
With audio recording enabled the device will record audio for the current video clip via
the integrated microphone. This feature can be enabled/disabled by pressing the "Up"
button while video recording.
- 7 -