Photo Capture Mode; Playback Mode; Standby Mode; Driving Shortcuts - Z-EDGE Z3 Bedienungsanleitung

Backlight Off Setting
Automatically turn off the LCD display screen after 1, 3 or 5 minutes. This feature is useful
if the display screen proves a driving distraction for the driver. To leave display screen on
continuously whilst recording, select "Off." Feature can be set to Off, 1 min, 3 mins or 5
mins inside the menu: System Settings > Backlight Off Setting. Turn on the display screen
again by pressing any button.

PHOTO CAPTURE MODE

From standby mode short press "Mode Switch" button to switch to photo capture mode.
Capture a photo by pressing the "OK" button. "Resolution" can be set to 4M, 9M or 13M
inside the menu: Photo Capture Mode Menu > Photo Resolution.

PLAYBACK MODE

From standby mode short press "Mode Switch" button to switch to playback mode.
Browse video and image files by pressing the "Up" and "Down" buttons. Play/Pause
highlighted video files by pressing "OK" button.

STANDBY MODE

This is the default mode the device enters when not recording or capturing images. In
standby mode you can adjust settings inside the system menu. To enter "Standby Mode"
while recording a video, press the "OK" button to stop the current video recording.

DRIVING SHORTCUTS

• Turn audio recording on/off while recording a video by pressing the "Up" button.
• In addition to automatic video file protection, any video can be protected manually by
pressing the "Menu" button during a video recording. A warning icon appears on screen
to signify the file has been successfully protected.
• Turn parking mode on/off while recording a video by pressing the "Down" button.
- 8 -