Live Panning; Memory; Change Frequency (60Hz To 50Hz) - Reinecker MANO XXL Gebrauchsanweisung

Live Panning

 In the state of amplification, users can slide the Joystick
the real-time video mode to navigate the image for seeing more
without moving the unit.
 Press the Zoom in
help you re-center the image (Red Dot appears).
 Two ways to quickly jump to the start/end point:
1) press and hold the Power Button
2) quickly push the Joystick
For example, if you have finished reading a horizontal line and
want to read from the beginning of the next line, please hold the
Power Button
Joystick left
and refreshed according to the maximum navigation range when
reading.
 The navigation speed can be adjustable in three levels: slow, me-
dium (the factory default) and fast. Push the Joystick
and press the Zoom in/out to increase/decrease the reading speed.

Memory

The unit will memorize automatically the most recent settings such as
color mode, magnification, beep when power is off normally and apply
them when the unit is on next time.

Change frequency (60Hz to 50Hz)

Press and hold the Power Button
3 seconds, to change frequency from 60Hz to 50Hz or the other way
around. Change when necessary, only if there is a unpleasant flicker
on the screen.
and Zoom Out
and slide the Joystick
twice. The start point or end point will be auto recorded
Buttons at the same time to
and slide the Joystick
in the same direction twice.
left or just quickly push the
and the Color Button
when in
to one side
for about
41