Hendi 2000 Bedienungsanleitung Seite 7

• Capacity mode: If you choose capacity mode, press the "Power key"
will be switched on. Default Capacity is 100W. Now you can programme the capacity required by means of
the arrow keys &
• Temperature Mode: If you select the temperature mode, press the "Temperature Key"
the "Temperature key"
the required temperature by means of the arrow keys
the highest, temperature division is 5ºC.
• Timer setting: After programming the power or temperature, you can opt to programme the timer, this
timer switches the appliance off after the programmed time has been reached. You can do this by pressing
the "Timer key" once after programming the power or temperature, the lighting of the "Timer key"
will be switched on.
, 2000W being the highest and 100W the lowest position.
will be switched on. Default Set Temperature is 100°C. Now you can programme
, the lighting of the "Power key"
& , the lowest temperature is 35ºC and 240ºC
, the lighting of
EN
7