Putting Into Service / Operation - HEYLO HL 800 Bedienungsanleitung

5. Putting into service / operation

To switch the unit on/off, press the power . to start the unit.
You start in automatic mode.
In this operating mode, the motor speed is controlled by a sensor.
The speed of the fan motor is automatically regulated in three stages, depending
on the air quality. The more particles in the air, the higher the fan motor speed.
To switch off, press the button again and the unit goes into standby mode.
Press the "Speed" button to change the fan speed. You can select 3 air output
levels by repeated tapping.
With the Mode button you can select 3 programmes
In automatic mode, the unit automatically selects the appropriate
fan speed depending on the air quality. At night, the unit
automatically reduces the fan speed. The ionisation function is in
operation.
The turbo programme is useful in case of heavy air pollution, e.g.
cigarette smoke. The unit then runs at the highest fan speed.
Press the "Sleep" button to operate the machine manually at the
quietest level. This ends the automatic mode. All lights and displays
are switched off and the fan runs at the lowest speed. It no longer
responds to the air sensor
When the machine is switched on, you can press the "Timer" button to let the
Air quality
17
EN