Cleaning And Filter Change - HEYLO HL 800 Bedienungsanleitung

Disposal of the filters: The filters can be disposed of in household waste.
If the unit has been used in polluted air, the used filters must be packed airtight in bags and
disposed of properly. In case of contamination with viruses, please allow for a waiting period in
which the viruses can die off or wear gloves and protective mask (min. FFP2) when changing the
filter.

7. Cleaning and filter change

Pre-filter:
Aluminium pre-filter (coarse dust filter) class G4 according to EN 779
▪
▪
▪
▪
Cleaning and filter change:
▪
▪
Cleaning 2 x per month and filter change every 2 years
Pre-filter for the main filters
Filter for specific large dusts up to 3 µm
Deposition efficiency 85-98% at 10 µm and 30-55% at 1 µm
Asorption of coarse dust
The surface can be vacuumed with a vacuum cleaner.
The filter can also be rinsed with clean water, but it must be completely dry
before it is used again.
You can pull the main filter out of the
unit by the small clip
NOTE: Please make sure that the
retaining strap points outwards.
NOTE: Before first use, the filters must
be removed from their protective
packaging
To clean the air outlet, lift out the grille
on the side with the Δ symbol.
Now you can clean the area with a dust
cloth.
Cleaning the air quality sensor
On the back of the device there is a flap
behind which the sensor is installed.
Open the flap and carefully clean the
sensor with a cotton swab.
NOTE: you should do this every 2 month
or if the display permanently shows poor
quality
20
EN