Step 4. Preparing The Custom Panel - Samsung DW60J9970 Serie Installationsanleitung

Installing your dishwasher
STEP 4. PREPARING THE CUSTOM PANEL
Ø 2
1. Place the supplied installation manual at the back of the custom panel (to be attached to the door of the
product) to be installed and temporarily fi x it using transparent tape.
• The top part of the supplied installation manual and the top part of the custom panel must be
aligned.
CAUTION
• Use a custom panel between 3-9 kg.
2. Pre-drill the 6 points marked on the installation manual with a 2-pi drill bit to a depth of 10-12mm.
3. Remove the installation manual and assemble the supplied part
top part as shown above.
14_ Installing your dishwasher
FBI-Install_DD68-00167B-05_EN.indd 14 FBI-Install_DD68-00167B-05_EN.indd 14
Ø 2
by fastening the 2 screws
2
5
5
2
2
to the
5
2017-02-08 2017-02-08 1:43:42 1:43:42