Battery Connections - Viper AS710R Bedienungsanleitung

USER MANUAL
Batteries emit hydrogen. Explosion or fire can result from hydrogen. Keep sparks and
open flames away! It is recommended to push the button (C2) to turn recovery tank open
before charging.
Flammable materials can cause an explosion or fire. Do not use flammable materials in
tanks.
Flammable materials or reactive metals can cause an explosion or fire. Do not pick up by
hand.
WARNING
of death for the operator.
NOTED
functions.
MACHINE SET UP & INSTALLATION
Be sure and check packing carton for any damage. Report immediately any damage to carrier.
Check contents of package to ensure that the following items are included:
1. Machine
2. Squeegee assembly
3. Brush assembly (x2)
4. User manual
5. Battery charger (If equipped)
6. Batteries (x4) (If equipped)
7. Connecting wire for battery and charger (If equipped)
8. Warning lamp (If equipped)
9. Bumper bracket (If equipped)
1. Turn off the key switch (E5).
2. Turn the seat (A1) open, push board (C2) and turn recovery tank (A3) open. If machine does
not include batteries. Fit batteries suitable to your requirements.
After selecting batteries, please choose WET or GEL mode with toggle switch on the back
of PCB, as shown in the figure below.
It indicates a potential risk of injury or dangerous situation with risk
It indicates a remark related to important reminding or useful
UNPACKING MACHINE

BATTERY CONNECTIONS

7
ENGLISH