Residual Risks - EINHELL JTS225 Handbuch

the sanding debris is hot after long periods of
working.
d) When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
e) Do not touch and/or inhale harmful/toxic
dust generated during sanding. All persons
in the vicinity of the work area must wear
appropriate personal protective equipment
for protection against harmful/toxic dusts.
Use the dust extraction facility and keep the
work area well ventilated.
f) Ensure that you have removed foreign objects
such as nails and screws from the workpiece
before commencing sanding.
g) Do not force sander, let the tool do the work
at a reasonable speed. Overloading will occur
if too much pressure is applied and the motor
slows resulting in inefficient sanding and pos-
sible damage to the sander motor.
h) Don't continue to use worn, torn or heavily
clogged sanding paper.
i) Don't touch the moving sanding paper.

RESIDUAL RISKS

Even if you are operating this product in ac-
cordance with all the safety requirements,
potential risks of injury and damage remain.
The following dangers can arise in connection
with the structure and design of this product:
1. Injuries and damage to property due to broken
application tools.
2. Danger of injury and property damage caused
by flying objects.
102 EN