Technical Data; Care & Maintenance - EINHELL JTS225 Handbuch

Technical Data

Nominal voltage
Rated power
No-load speed (n) of round pad
Oscillating speed of triangular pad
Sanding surface (round pad)
Sanding surface (triangular pad)
Length (min./max.)
Weight
Protection Class
Sound pressure level (L
pA
Sound power level (L )
wA
Max. vibration emission (a
Care & Maintenance
Caution! Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of oil
or grease.
- Wear safety glasses to protect your eyes whilst
cleaning.
- For safe and proper working, always keep the
machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the motor
and around the on/off switch. Use a soft brush
to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe it
with a soft damp cloth. A mild detergent can
be used but nothing like alcohol, petrol or other
cleaning agent.
230–240 V~ / 50 Hz
750 W
600 - 1800/min
2400 - 7200/min
Ø 225 mm
285 x 285 x 285 mm
110 - 165 cm
4.4 kg
) 86.5 dB(A) / Uncertainty K = 3 dB(A)
97.5 dB(A) / Uncertainty K = 3 dB(A)
) 4.435 m/s
h
- Never use caustic agents to clean plastic parts.
- Lubricate all moving parts at regular intervals.
- Periodically check all fixings. These could be-
- In case of excessive sparking, have the carbon
/ II
/ Uncertainty K = 1.5 m/s
2
come loose with time due to vibration.
brushes replaced at your HORNBACH store.
Danger! The carbon brushes must
only be replaced by qualified electri-
cians.
Danger! If the supply cord is dam-
aged, it must be replaced by the man-
ufacturer or its service agent or similarly
qualified person in order to avoid hazard.
2
EN 107