Operating The Appliance; Switching On The Appliance; Switching Off And Disconnecting The Appliance; Switching Button Lock On Or Off - Siemens KF86F-Serie Gebrauchsanleitung

Operating the appliance

en
Frozen food container
You can take out the frozen food container (large):
Pull the freezer compartment drawer all the way out
1.
and remove the frozen food container (flat).
Lift the frozen food container (large) and remove it.
2.
Ice cube tray
You can make ice cubes:
Fill the ice cube tray 3/4 full with water and place in
1.
the freezer compartment.
If the ice cube tray is stuck to the freezer
Note:
compartment, loosen with a blunt implement only
(e.g. spoon handle).
To loosen the ice cubes, twist the ice cube tray
2.
slightly or hold briefly under flowing water.
46
1Operating the appliance
S witching on the appliance
O p e r a t i n g t h e a p p l i a n c e
Insert mains plug in a socket.
1.
Wait until the refrigerator compartment, cool-fresh
2.
compartment and freezer compartment displays light
up.
The appliance begins to cool.
Adjust the required temperatures in the refrigerator
3.
compartment, cool-fresh compartment and freezer
compartment.
~ "Setting the temperature" on page 47
Operating tips
After the appliance has been switched on, it may
■
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
The fully automatic NoFrost system ensures that the
■
appliance remains free of frost. Defrosting is not
required.
The sides of the housing are heated slightly in
■
certain areas. This prevents condensation
in the area of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
Pull out the mains plug or switch off the fuse.
■
Shutting down the appliance
If you do not use the appliance for a prolonged period:
Pull out the mains plug or switch off the fuse.
1.
The appliance no longer cools.
Clean the appliance.
2.
Leave the appliance open.
3.

Switching button lock on or off

The button lock protects the appliance from
unintentional operation.
Press and hold lock button for 3 seconds.
■
The button lock is switched on when the lock button
lights up.When the button lock is switched off, the
temperature displays light up.

Setting the temperature unit

You can choose between the unit °C and °F:
Press settings button.
1.
Press °C/°F button.
2.
Press N/M button freezer compartment repeatedly
3.
until the freezer compartment temperature display
shows °C or °F.
Press settings button.
4.
The setting is saved.