Herunterladen Diese Seite drucken

Sony MFM-HT205 Bedienungsanleitung Seite 28

Lcd multi function display

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 123
• PAP On: Pictures from two input sources are displayed
on the screen. Two same-size pictures are
displayed in the centre of the screen. The left
screen shows the main picture, the right screen
shows the sub picture. You can select the input
for sub picture and audio input source.
• Off:
The PIP or PAP function is turned off.
To select the input for sub picture (PIP function: On/
PAP function: On)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "PIP/PAP" and
press the OK button.
4 Press the M/m buttons to select "PIP/PAP Setting"
and press the OK button.
The "PIP/PAP Setting" menu appears on the screen.
5 Press the M/m buttons to select "PIP On" or "PAP
On" and press the OK button.
6 Press the M/m buttons to select "PIP/PAP" and
press the OK button.
The "PIP/PAP" menu appears on the screen.
7 Press the M/m buttons to select the desired input
source and press the OK button.
• TV:
A TV program is displayed in the sub-
picture area.
• COMPONENT: The picture sent from the video
equipment connected to the display's
video input jacks for COMPONENT is
displayed in the sub-picture area.
• VIDEO 1:
The picture sent from the video
equipment connected to the display's
video input jack for VIDEO 1 is
displayed in the sub-picture area.
• VIDEO 2:
The picture sent from the video
equipment connected to the display's
video input jacks for VIDEO 2 is
displayed in the sub-picture area.
Note
The inputs for main/sub pictures must be selected as shown below.
Main
Sub
PC 1
TV
PC 2
COMPONENT
VIDEO 1
VIDEO 2
Note
When displaying a program with teletexts on the sub-picture area, you
cannot switch the PIP or PAP function using the PIP/PAP button on the
remote control.
To switch off the PIP or PAP function, press the PIP/PAP button on the
display, or set "PIP/PAP Setting" menu to "Off."
To change the sub picture's size (PIP function: On)
1 Press the MENU button.
2 Press the M/m buttons to select
3 Press the M/m buttons to select "PIP/PAP" and
4 Press the M/m buttons to select "PIP/PAP Setting"
5 Press the M/m buttons to select "PIP On" and press
(Option) and
6 Press the M/m buttons to select "PIP Size" and
7 Press the M/m buttons to select the desired size and
To change the sub picture's position (PIP function: On)
1 Press the MENU button.
2 Press the M/m buttons to select
3 Press the M/m buttons to select "PIP/PAP" and
4 Press the M/m buttons to select "PIP/PAP Setting"
5 Press the M/m buttons to select "PIP On" and press
6 Press the M/m buttons to select "PIP Position" and
28
The main menu appears on the screen.
press the OK button.
The "Option" menu appears on the screen.
press the OK button.
and press the OK button.
The "PIP/PAP Setting" menu appears on the screen.
the OK button.
press the OK button.
The "PIP Size" menu appears on the screen.
Option
PIP/PAP
PIP/PAP Setting :
PIP/PAP :
PIP Size :
PIP Position
Audio Select :
Select
press the OK button.
• Large
• Middle
• Small
The main menu appears on the screen.
press the OK button.
The "Option" menu appears on the screen.
press the OK button.
and press the OK button.
The "PIP/PAP Setting" menu appears on the screen.
the OK button.
press the OK button.
The "PIP Position" menu appears on the screen.
Option
PIP/PAP
PIP/PAP Setting :
PIP/PAP :
PIP Size :
PIP Position
Audio Select :
Select
(Option) and
DVI-D: PC 1
PIP On
TV
Large
Middle
Small
1680 × 1050/60 Hz
Set
Exit
OK
MENU
(Option) and
DVI-D: PC 1
PIP On
TV
Large
1680 × 1050/60 Hz
Set
Exit
OK
MENU

Werbung

loading