10
Make sure that the LED (I) changes as shown in the illustration and go to the next
step.
•
It takes about 90 seconds until 1 appears.
Vérifiez que la DEL (I) change comme indiqué sur l'illustration puis passez
à l'étape suivante.
•
Il faut environ 90 secondes pour que 1 apparaisse.
Achten Sie darauf, dass sich die LED (I) wie oben gezeigt ändert, und fahren Sie
dann mit dem nächsten Schritt fort.
•
Es dauert ca. 90 Sekunden, bis 1 angezeigt wird.
Verificare che il LED (I) cambi come mostrato nell'illustrazione e passare alla fase
successiva.
•
1 compare dopo circa 90 secondi.
I
J
•
Once you have installed the FINE Cartridges, do not remove them unnecessarily.
•
If the Alarm lamp (J) lights orange, make sure that the FINE Cartridges are correctly installed.
•
The LED will turn off if the machine is not operated for about 5 minutes. To restore the display,
press any button except the ON button.
•
Après avoir installé les cartouches FINE, ne les retirez pas inutilement.
•
Si le témoin d'Alarme (Alarm) (J) clignote en orange, vérifiez que les cartouches FINE sont
correctement installées.
•
La DEL s'éteint si la machine n'est pas utilisée pendant environ 5 minutes. Pour restaurer
l'affichage de l'écran, appuyez sur n'importe quel bouton, sauf MARCHE (ON).
•
Nehmen Sie die FINE-Patronen (FINE Cartridges) nach dem Einsetzen nicht unnötig heraus.
•
Wenn die Alarm-Anzeige (J) orangefarben leuchtet, stellen Sie sicher, dass die FINE-Patronen
(FINE Cartridges) richtig eingesetzt wurden.
•
Die LED-Anzeige schaltet sich ab, wenn das Gerät etwa 5 Minuten lang nicht bedient wird. Um
die Anzeige wiederherzustellen, drücken Sie eine beliebige Taste, außer der Taste EIN (ON).
•
Dopo avere installato le cartucce FINE (FINE Cartridges), non rimuoverle se non in caso di
effettiva necessità.
•
Se la spia Allarme (Alarm) (J) si accende in arancione, verificare che le cartucce FINE (FINE
Cartridges) siano installate correttamente.
•
Il LED si spegne se la stampante non viene utilizzata per circa 5 minuti. Per ripristinare il
display, premere qualsiasi pulsante tranne il pulsante ON.