Function And Device Overview - HomeMatic IP HmIP-FAL230-C10 Installations- Und Bedienungsanleitung

Function and device overview

Observe the installation instructions for installa-
tion in distribution systems (DIN VDE 0100-410).
The device may only be operated within residen-
tial buildings.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability.
3 Function and device overview
The Homematic IP Floor Heating Actuator offers com-
fortable and demand-based room-by-room control of
your floor heating system via smartphone app or the
Homematic IP Wall Thermostat, according to your per-
sonal needs.
The floor heating actuator can be used for controlling
a floor heating system with up to 10 heating zones/15
heating circuits as well as a heating pump or circulation
pump. Furthermore, the device offers operation in heat-
ing or cooling mode (provided that your heating system
offers these operating modes).
You can flexibly mount the device using the supplied
screws or a DIN rail. With the secure radio communica-
50