Scope Of Supply; Technical Data - NovoPress ACO203XL Betriebsanleitung

ACO203XL / ACO203XL BT
5

Scope of supply

EN
The scope of supply for the standard equipment includes:
ACO203XL / ACO203XL BT
Press device incl. operating manual
Battery charger incl. operating
instructions
Battery 18 V d.c.
Safety information
EU declaration of conformity
Carrying case
6

Technical Data

Device:
Rated voltage/battery:
Power consumption
Nominal force:
Height:
Length:
Width:
Net weight:
Compression range:
Max. noise level:
Noise pressure level at user's ear:
Vibration value:
Type of protection:
Temperature range during operation:
1) Measurement uncertainty 3 db(A)
The stated vibration emission value was measured using a standard test procedure and can be
employed for the purpose of comparison with another device.
The stated vibration emission value can also be used to obtain an initial estimate of interruptions
during intermittent operation.
Caution The vibration emission value may differ from the stated value while the device is actually in
use, depending upon the manner in which the device is used. It may be necessary to establish safety
measures to protect operating personnel, depending on the actual conditions of use (intermittent
operation.
Battery charger
For information on the function and operation of the battery charger and the rechargeable batteries,
please consult the battery charger operating instructions.
2) Measurement uncertainty 1.5 m/s²
Information!
Wear hearing protection.
Optional additional accessories (e.g. press jaws,
adaptor jaws, press collars) may also be included.
Please contact the system supplier for information on
the scope of supply.
ACO203XL / ACO203XL BT
18 V d.c. (lithium-ion) / 1,5Ah / 3,0 Ah
450 W
32 kN
111 mm
490 mm with 1,5 Ah battery
510 mm with 3,0 Ah battery
80 mm
3,8 kg (with battery)
Plastic: up to 110 mm Ø
Metal: up to 108 mm / 4'' Ø
89 db(A) 1)
78 db(A) 1)
<2,5 m/s² 2)
IP20
-10°C to +50°C
16