Conel DRAIN Gebrauchsanleitung Seite 35

Performing the test:
Closing the emergency flap: Fold up the
Î
red lever until it locks (clicks audibly into
place) (1).
Turn the red locking screw from its
Î
housing (2).
Screw the test funnel into the thread (1).
Î
Fill the funnel with clean water up to the
Î
"100 mm" mark (2).
Top up with water if the level drops.
Î
After testing:
Opening the emergency flap: Press down
Î
the red lever until it stops (1).
Unscrew the test funnel from the
Î
thread (2).
Turn the red locking screw into the
Î
thread (3) and tighten it with 5 – 6 N·m.
DRAIN / POST-INSTALLATION INSPECTIONS
2.
1.
2.
3.
INSTRUCTIONS FOR USE
1.
2.
1.
35