Pkm 9080 BZN Bedienungsanleitung Seite 33

2. Do not clean the control panel with a detergent. Use a damp cloth.
Otherwise you may damage the electronic components of the controls.
3. Never use any alcohol-containing detergents to clean matt black painted
appliances as these detergents cause colour-changes.
4. Clean the glass panels
5. When you clean or replace the grease filters or the carbon filters also clean all
visible components on the bottom of the appliance with a mild, non- acrid and
fat-dissolving detergent.
6. Do not damage the grid of metal-made grease filters. The colour of the metal
surface may change due to frequent cleaning as well as the use of aggressive
detergents.
7. Such changes do not influence the capacity of the appliance and are no reason
for complaint.
8. Do not use a steam cleaner. RISK OF ELECTRIC SHOCK!
9. Do not use any abrasive detergents.
Grease filter
You do not need to replace aluminium filters. Clean them once a month by hand or
in a dishwasher (30
abrasive detergents! Do not use any alkaline dishwasher-detergents! (ph more than
7). Do not put the filter in the dishwasher together with tableware Filters which are
blocked with food debris do not carry a guarantee. Dry the filters properly before
you reinstall them.
Carbon filters
Conventional carbon filters cannot be cleaned. The capacity of these filters is
limited. You can use such filters for about 3-6 months. Replace a depleted filter.
Find further information on the filter packaging.
Replacing of the illuminant
1. Replace a defective illuminant immediately.
2.
WARNING! Disconnect the appliance from the energy supply.
3. Let the illuminant cool down before replacing.
4. Remove the grease filters and push out the illuminant. Be especially careful
while doing so.
Equipment depending on model.
4
4 with a suitable detergent only.
Aluminium filter
). Do not use any acrid or corrosive detergents. Do not use any
0
33