Pkm 9080 BZN Bedienungsanleitung Seite 30

5. Insert the grease filters and connect the appliance to the mains
➢ Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.
Installation steps (recirculation mode)
1. If your home is not equipped with an air outlet for extracting exhaust air to the
outside, the exhaust hose is not required. The further installation is similar to
the I
NSTALLATION STEPS
2. You can use carbon filters for odour absorption in recirculation mode only. For
installing carbon filters, remove the grease filter. Press the lock and pull the
grease filter downwards.
3. Plug the carbon filter into the appliance and turn in clockwise direction. Repeat
on the opposite side.
1 close
WARNING! Install the carbon filters safely and properly; otherwise
the carbon filters can loosen and cause hazardous situations.
If the socket is covered by the chimney, you must plug in the appliance at an
3
earlier point in
time.
(
EXTRACTION MODE
Unplug the appliance before installing
the carbon filter.
For recirculating mode only.
30
3 .
).