Tuthill FILL-RITE RD-Serie Betriebs- Und Sicherheitsanleitung Seite 12

Safety Testing Information
The following standards were used to show compliance in North America:
UL 674 – Electric Motors and Generators for Use in Division 1 Hazardous (Classified) Locations, 5th Edition.
The following standards were used to show compliance in the European Union:
Directive 94/9/EC – Equipment and protective systems intended for use in potentially explosive atmospheres.
EN 60079-0:2012 Explosive atmospheres – Part 0: Equipment – General requirement.
EN 60079-1:2007 Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures "d".*
IEC 60079-0 Explosive atmospheres – Part 0: Equipment – General requirements, 6th Edition.
IEC 60079-1 Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures "d", 7th Edition.
Directive 2006/42/EC – Directive on machinery.
EN 809:1998 +A:2009 – Pumps and pump units for liquids – Common safety requirements.
EN ISO 12100:2010 – Safety of Machinery – Basic concepts, general principles for design.
Directive 2004/108/EC – Electromagnetic compatibility.
Directive 2011/65/EU – Restrictions of the use of certain hazardous substances in electrical and electronic equipment.
*The minimum and maximum values of the flameproof joints differ from what is specified in Table 1 of EN60079-
1:2007 (ABNT NBR IEC 60079-1:2009). Manufacturer is to be contacted for information on the dimensions of the
flameproof joints.
USA
www.fillrite.com
DC001582-000 Rev. 2
12