Inhaltsverzeichnis
Werbung
3 EN-US English
3.6.3 Measuring a temperature
1.
Enable temperature measurement functionality: Select
plication options > Gas camera mode > Temperature measurements.
2.
Add a spotmeter: Select
3.
Aim the camera toward the object. Make sure the spotmeter is on the point
of interest.
4.
Adjust the infrared camera focus. This is very important for a correct temper-
ature measurement.
5.
The spotmeter temperature is displayed on the screen.
3.7 Camera parts
3.7.1 View from the front
See Figure 2.1 View from the front, page 2.
1.
Autofocus button.
2.
Save button.
3.
Viewfinder.
4.
Knob to change the dioptric correction for the viewfinder.
5.
Attachment point for the neck strap.
6.
Laser receiver.
7.
Laser transmitter.
8.
Camera lamp (left and right sides).
9.
Infrared lens.
10. Digital camera.
3.7.2 View from the rear
See Figure 2.2 View from the rear, page 2.
1.
Focus ring.
2.
Speaker.
3.
Programmable button.
4.
Image archive button.
5.
Navigation pad with center push.
6.
Back button.
7.
On/off button.
8.
Hand strap.
9.
Multi-touch LCD screen.
#T810428; r. AB/55676/55676; mul
(Measurement) >
(Settings) > Ap-
(Center spot).
5
Werbung
Inhaltsverzeichnis
