Electrolux ENL60810X Benutzerinformation Seite 10

10 electrolux side by side refrigeration user manual
4. The clock can be switched between 24 hour or 12 hour formats
by pressing the drinks chill button. In 12 hour format the indicator
will switch between am and pm accordingly (see diagram below).
5. Once the time has been set press the clock button to
save the setting.
Controlling the temperature
We recommend that when you start your refrigerator for the first
time, the temperature for the refrigerator is set to 3°C and the
freezer to -18°C. If you want to change the temperatures, use the
instructions below. You should make only small adjustments and
wait 24 hours to see whether you need to make further changes.
tips and information
When you set a temperature, you set an average temperature
for the whole appliance cabinet. Temperatures inside each
compartment may vary, depending on how much food you store
and where you place it. High or low room temperature may also
affect the actual temperature inside the appliance.
Changing the freezer temperature
Press the freezer button to make the freezer colder in
1°C steps. Once -23°C is reached the display will return to -14°C
with the next button press. You'll notice that the bar graph gets
smaller with colder freezer settings. If you set –14ºC, the bar graph
will flash continuously to warn that it
is not cold enough for long term storage of frozen food.
Changing the refrigerator temperature
Press the fridge button to make the fridge colder in 1°C steps.
Once 0°C is reached the display will return to 7°C with the next
button press. The bar graph gets smaller with colder settings.
Fast freeze (quick chill) function
Use the fast freeze (quick chill) function when you add a large amount
of food to the freezer compartment. This freezes the food quickly but
does not affect the temperature in the refrigerator compartment.
To use this function, press the fast freeze (quick chill) button
once. An animated icon will light up. The fast freeze (quick chill)
function will now operate for 90 minutes. If you want to turn the
fast freeze (quick chill) function off before 90 minutes have passed,
simply press the fast freeze (quick chill) button again. The icon will
disappear and the freezer will return to normal operation.
Freezer temperature alarm
If the freezer becomes too warm a buzzer will sound.
The icon adjacent to the alarm reset button (on non-ice and
water models) or above the alarm reset button (on ice and water
models), the freezer set temperature and the bar graph
will all flash until the alarm reset button is pressed. Once pressed,
the alarm disable icon will illuminate for 50 minutes, or until the
temperature reaches an acceptable level.
Make sure nothing is holding the freezer door open and move any
warm food away from the temperature sensor (see diagrams on
page 9).
If the freezer is still too warm after 50 minutes the alarm will sound
again, indicating that something may be wrong with your appliance.
Note: The freezer temperature alarm can be reset for 12 hours
by pressing the alarm reset button continuously for 10 seconds.
Door alarm
If the refrigerator door is left open for longer than 2 minutes a
buzzer will sound and an arrow pointing to an open door will flash.
The refrigerator temperature settings and bar graph will also flash.
If you want to leave the door open while you load the fridge, you
can turn the alarm off for 8 minutes by pressing the alarm reset
button.
If the alarm is sounding for no apparent reason, check whether
anything is holding the door open. Closing the door resets the
alarm for a further 2 minutes.