Operation; Energy Saving Tips; Using The Cooling Device - Waeco COOLMATIC MDC-50 Bedienungsanleitung

Operation

Connecting to 230 V mains supply
Danger of fatal injuries!
Never handle plugs and switches with wet hands or if you are
standing in a puddle.
If you are operating your cooling device on board a boat with
a mains connection of 230 V from the land, you must install
a ground protection circuit breaker between the 230 V mains
supply and the cooling device.
Seek advice from a trained technician.
➤ To operate the cooling device with a 230 V mains supply, use an EPS-
100 W or MPS-35 MOBITRONIC rectifier.
7 Operation
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and
maintenance" on page 33).
7.1

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device.
Do not open the cooling device more often than necessary.
Do not leave the door open for longer than necessary.
Defrost the cooling device as soon as a layer of ice forms.
Avoid unnecessarily low temperatures.
Clean the condenser of dust impurities at regular intervals.
7.2

Using the cooling device

The cooling device conserves fresh foodstuffs. The freezer compartment
conserves frozen foodstuffs and freezes fresh foodstuffs.
Caution!
Ensure that food or liquids in glass containers are not excessively
refrigerated.
Liquids expand when they freeze and can thus destroy the glass
containers.
30
COOLMATIC MDC Series