Parkside 120 A2 Montage-, Bedienungs- Und Sicherheitshinweise Seite 67

Pay attention to the condition
„
of the welding cable, electrode
holder and the earth terminal.
Wear and tear of the insulation
and the live parts can lead to
hazards and reduce the quality
of the welding work.
Arc welding creates sparks,
„
molten metal parts and
smoke. Therefore ensure that:
All flammable substances and/
or materials are removed from
the work station and its imme-
diate surrounding.
Ensure the work station is
„
ventilated.
Do not weld on containers,
„
vessels or tubes that contain
or contained flammable liquids
or gases.
„
form of direct contact with the
welding current circuit. The
open circuit voltage between
the electrode holder and earth
terminal can be dangerous,
there is a risk of electric shock.
Do not store or use the device
„
in a damp or wet environment
or in the rain. Protection rating
IP21S is applicable in this case.
Protect your eyes using the
„
appropriate protective glasses
(DIN level 9-10), which are
fastened to the supplied weld-
ing mask. Wear gloves and
Avoid any
dry protective clothing that are
free of oil and grease to pro-
tect the skin from exposure to
ultraviolet radiation of the arc.
„
the welding power source to
defrost pipes.
Please note:
The light radiation emitted by
„
the electric arc can damage
eyes and cause burns to
the skin.
Arc welding creates sparks
„
and drops of melted metal.
The welded workpiece starts
to glow and remains hot
for a relatively long period.
Therefore, do not touch the
workpiece with bare hands.
Arc welding can cause
„
vapours to be release that
may be hazardous to health.
Be careful not to inhale these
vapours.
Protect yourself from the
„
harmful effects of the electric
arc and keep people that are
not involved in the work away
from the arc maintaining a
distance of at least 2 m.
ATTENTION!
During the operation of the
„
welding device, other consum-
ers may experience problems
Safety instructions
Do not use