Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Parkside 120 A2 Montage-, Bedienungs- Und Sicherheitshinweise

Inverter-schweissgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81
Introduction / Safety instructions
Maximum effective
input current:
Rated value of the
open circuit voltage:
Protection class:
Weight:
Duty cycle X:
Falling characteristic
Material thicknesses
which can be welded:
z Safety instructions
Please read the operating instruc-
tions with care and observe the
notes described. Familiarise
yourself with the device, its
proper use and the safety notes
based on these operating instruc-
tions. The rating plate contains
all technical data of this welding
device; please learn about the
technical features of this device.
packaging material away from
small children. There is a risk
of suffocation!
This device may be used by
children aged 16 years and
older, and by persons with
reduced physical, sensory or
mental capacities, or a lack of
experience and knowledge,
if they are supervised or have
been instructed in how to use
I
: 13.8 A
1eff
U
: 70 V
0
IP21S
approx. 3 kg
30% at 40 °C
1.5 mm -
3.0 mm
Keep the
the device safely and under-
stand the dangers that may
arise when using it. Do not
allow children to play with the
device. Cleaning and day-to-
day maintenance must not be
performed by children without
supervision.
Repairs or/and maintenance
work must only be carried out
by qualified electricians.
Only use the welding cables
(PISG 120 A2, H01N2-
D1x10 mm
scope of delivery.
During operation, the device
should not be positioned
directly on the wall, covered or
jammed between other devices
so that sufficient air can be
absorbed through the ventila-
tion slats. Makes sure that the
device is correctly connected
to the supply voltage. Avoid
any form of tensile stress of
the power cable. Disconnect
the plug from the socket prior
to setting up the device in
another location.
If the device is not in operation,
always switch it off by pressing
the ON/OFF switch. Place the
electrode holder on an insu-
lated surface and only remove
it from the holder after allowing
it to cool down for 15 minutes.
) included in the
2

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

331996

Inhaltsverzeichnis