It Is Recommended To Use Low Pir Sensitivity In Environments With Lots Of - Num'axes PIE1046 Gebrauchsanleitung

PIR
Settings
PIR switch
PIR sensitivity
PIR interval
Time Lapse
Working timer No 1
Working timer No 2
PIE1046 - Indice A –Septembre 2020
Programmable options (default settings in bold characters)
OFF / ON
With the PIR switch OFF, the PIR sensor will be turned off and the camera will not be
able to take photos/videos per motion activation.
With the PIR switch ON, the PIR sensor will be turned on and the camera will be able
to take photos/videos per motion activation even when the Time Lapse setting will
be ON.
High / Medium / Low
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference between body heat and
outdoor temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and environment temperature
are hard to tell by the camera, the suggested setting is high.

It is recommended to use low PIR sensitivity in environments with lots of

interference like hot wind, smoke, near window, etc.
OFF / ON
Select "ON" then press "OK" to set the time interval that you desire between
photos/videos upon motion. This option avoids camera taking to many photos or
videos.
Example: if the PIR interval is 00:01:00, the camera will wait 1 minute between
photo/video recordings with motion.
Configurable PIR Interval (HH:MM:SS): from 00:00:05 to 23:59:59.
OFF / ON
With "Time Lapse" ON, the camera will capture photos or videos automatically at a
preset time interval regardless of whether motions are detected or not.
Select "ON" then press "OK" to set the interval; the camera will shoot photos or
video clips automatically upon the user set interval. Object motion can still trigger
the camera to take photos/videos if the PIR Switch is ON.
Example: if Time Lapse is set to 00:30:00, the camera will automatically capture
photos/videos every 30 minutes.
Configurable Time Lapse (HH:MM:SS): from 00:00:05 to 23:59:59.
OFF / ON
Each day, the camera will work only during the user set time period.
Select "ON" then press "OK" to set the start time and end time of the desired
working period (hour/minute).
Example: If the preset working timer 1 is 15:00-18:00; the camera will work only
between 15h00 (03:00 PM) and 18h00 (06:00 PM) each day.
OFF / ON
Each day, the camera will work only during the user set time period.
Select "ON" then press "OK" to set the beginning time and end time (hour/minute).
Example: If the preset working timer 2 is 20:00-22:00; the camera will work only
between 20h00 (08:00 PM) and 22h00 (10:00 PM) each day.
23/76