Samsung DW60M5070-Serie Benutzerhandbuch Seite 73

ADJUSTING THE AMOUNT OF RINSE AID
You can adjust the amount of rinse aid by below sequence. As good drying performance as you set the
higher number.
1. Turn the dishwasher on.
2. Press the Express (Built-in model) or Program (Free Standing model) button for fi ve seconds within
60 seconds from turning on the dishwasher.(same with Softener setting mode)
3. Press the Delay start button to enter the Rinse aid setting mode.
4. The LED shows the present rinse level. (between d1~d5)
5. Press the Express (Built-in model) or Program (Free Standing model) button to select the amount of
rinse aid you want. The sets will change in the following sequence; d1  d2  d3  d4  d5  d1.
(The default level is d4.)
6. Select the amount of rinse aid and wait for 5 seconds to complete the setup.
HOW TO USE THE MULTI TAB OPTION
Your dishwasher has a Multi tab option which does not need salt and rinse aid but a 3 In1 tablet.
The Multi tab setting is only for use with Multi tab tablets. If using Multi tab tablet without this option,
the appliance will not get its best performance.
1. Put the Multi tab tablet into the container then start the Multi tab
option.
2. Close the lid and press until it locks in place.
When using Multi tab compact combination detergents ensure
that the lid can be closed correctly.
ATTENTION: Keep all detergents in a safe place out of
children's reach. Always add the detergent in the dispenser just
before starting the dishwasher.
DW5500MM_DW6KM5031BB_EG_DD81-02615L-00_EN.indd 21 DW5500MM_DW6KM5031BB_EG_DD81-02615L-00_EN.indd 21
Using the detergent and water softener _21
2019-11-08 2019-11-08 5:29:15 5:29:15