CRP40
7.3
Changing the door hinge
You can also change the hinge of the door, so that it opens to the left rather than the
right.
➤ Proceed as shown in fig. 6, page 5 to fig. 8, page 6, to change the hinges.
7.4
Connecting to a battery
The refrigerator can be operated with a 12 V to 24 V DC voltage supply.
A
NOTICE!
To prevent voltage and power losses, the cable should be as short as
possible and not be interrupted.
For this reason avoid additional switches, plugs or socket strips.
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. 9, page 6.
Key for fig. 9, page 6
Co-ordinate axis
l
∅
A
NOTICE!
Make sure that the polarity is correct.
➤ Before starting up the refrigerator for the first time, check whether the operating
voltage and the battery voltage match (see type plate).
➤ For the electrical connection you also need the wiring diagram (fig. 0, page 7).
No. in fig. 0,
page 7
1
2
3
4
EN
Meaning
Cable length
Cable cross section
Meaning
Electronic terminal rail
Compressor
DC fan (if present)
Mechanical thermostat
Setting up and connecting the refrigerator
Unit
m
mm²
15