CRP40
8.1
Energy saving tips
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
Defrost your refrigerator as soon as a layer of ice forms.
•
Avoid unnecessarily low temperature settings.
•
Clean dust and dirt from the condenser at regular intervals.
8.2
Using the refrigerator
The refrigerator conserves fresh foodstuffs. The freezer compartment conserves fro-
zen foodstuffs and freezes fresh foodstuffs.
A
NOTICE!
•
Make sure that drinks or foodstuffs in glass containers are not cooled
too severely. Drinks and liquids expand when they freeze. This can
break the glass containers.
•
Food may only be stored in its original packaging or in suitable
containers.
➤ Switch the refrigerator on by turning the knob (fig. 3 1, page 4) to the right.
I
NOTE
After switching on, the refrigerator requires approx. 60 s until the
compressor starts up.
A
NOTICE!
Ensure that the objects placed in the refrigerator are suitable for cooling
to the selected temperature.
Setting the temperature
You can set the temperature to any level using the knob. The built-in thermostat
regulates the temperature as follows:
•
Min. (left limit) = warmest setting
•
Max. (right limit) = coldest setting
EN
Using the refrigerator
17