Safety Messages - Ultimaker 2+ Connect Schnellstartanleitung

Ultimaker
2+ Connect
This quick start guide will help you set
up your Ultimaker 2+ Connect for first
use. Compatible with an expanding
range of materials, the Ultimaker 2+
Connect fits seamlessly within Ultimaker's
professional 3D printing ecosystem. Use
it for visual prototyping, concept models,
or anything else you can think of.
What's in the box
Accessories Consumables
• Glass plate • PLA Silver Metallic 750 g
• Spool holder • Glue stick
• Power adapter and cable • Oil
• Ethernet cable • Grease
• USB stick
• Calibration card
• 0.4 mm nozzle
Please retain all packaging for
warranty purposes.
Tools
• Hex screwdriver 2 mm
• Hex key 2.5 mm
• Nozzle wrench
• Print head calibration aid
Original instructions

Safety messages

This quick start guide contains warnings and safety notices.
Provides additional information that is helpful to do a task or to
avoid problems.
Warns of a situation that may cause material damage or injuries if one
does not follow the safety instructions.
User manual
Before using this product, read the user manual to learn about all its
features and safety-related information. You can find the full Ultimaker
2+ Connect user manual, available in English and many other languages,
on our website: ultimaker.com/2plusconnect-manual.
Support
For more information on technical support visit
contact your local reseller.
Ultimaker
Stationsplein 32
3511 ED Utrecht
The Netherlands
+31 (0)88 383 4000
support.ultimaker.com or
EN