auna Microstar Sing Bedienungsanleitung Seite 47

Program Play mode
When finished programming, tap PLAY BUTTON to confirm and start
program play. The PROG INDICATOR in the LED DISPLAY will light. While
playing, you may tap the NEXT or PREV BUTTON to skip to a desired song in
the program list.
To stop program play temporarily, tap the STOP BUTTON once. The PROG
INDICATOR in the LED DISPLAY and TV screen (as shown below) will remain
ON.
Tap PLAY BUTTON to resume program play.
Note: if you tap the STOP BUTTON twice consecutively, you will cancel
program play and erase the program list permanently. The PROG
INDICATOR in the LED DISPLAY and TV screen will go OFF.
Program review:
In stop mode, you can review the program list by pressing the NEXT or
PREV BUTTON.
Input functions
• DC JACK : Connect the DC plug of the DC5V output AC Adapter
(included) to this jack.
• USB JACK: Connect a USB flash drive (FAT32 formatted) up to 32GB (not
included) to this jack for playback of MP3 files.
• AUX IN JACK: Connect the 3.5mm stereo plug of a stereo audio cable
(not included) to this jack and the other end to an external audio player
for playback.
• MIC 1 / MIC 2 JACKS: Connect the microphone (one included) to either
one of the jacks to sing.
Output functions
• VIDEO OUT JACK: Connect the yellow coded RCA plug of the A/V cable
EN
47