Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - auna Microstar Sing Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
EN
34

SAFETY INSTRUCTIONS

Read these instructions. All uses guidelines must be read before using the
device. Keep the instructions for future use.
Children over the age of 8 and persons with reduced physical, sensory
or mental capabilities or those with a lack of experience and knowledge
may only use the device if they are instructed on how to do so by
a person responsible for their safety, or if they are supervised and
understand the hazards associated with the use of the device.
Protection against laser energy exposure
As the laser beam used in this compact disc player is harmful to the
eyes, do not attempt to disassemble the casing.
Stop operation immediately if any liquid or solid object should fall into
the cabinet.
Do not touch the lens or poke at it. If you do, you may damage the lens
and the player may not operate properly.
Do not put anything in the safety slot. If you do, the laser diode will be
"ON" when the CD door is still open.
If the unit is not to be used for a long period of time, make sure that the
power source is disconnected from the unit. Unplug the AC cord from
the wall outlet. Make it a practice to remove the AC cord by grasping
the main body and not by pulling the cord.
This unit employs a laser. The use of controls or adjustment or
performance of procedures other than those specified here may result
in exposure to hazardous radiation.
Placement
Do not use the unit in places which are extremely hot, cold, dusty or
humid.
Place the unit on a flat and even surface.
Do not restrict the air flow of the unit by placing it in a place with poor
ventilation, by covering it with a cloth or by placing it on a carpet.
Condensation
When left in a heated room where it is warm and damp, water droplets
or condensation may form inside the unit.
When there is condensation inside the unit, the unit may not function
normally.
Let it stand for 1 to 2 hours before turning the power on, or gradually
heat the room up and dry the unit before use.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10035303

Inhaltsverzeichnis